2015 Extended Abstracts

Extended Abstracts STLE Annual Meeting, May 17 - 21, 2015

Biotribology

A Bio-Tribological Methodology to Investigate Nanostructured Ti Based Composites for Hip-Joints (5/11/2015)

The Influence of Textured Surfaces on the Tribological Behaviour of Hip Replacements (5/15/2015)

The Lamellar-Repulsive Mechanism of Lubrication of Natural Joints (5/10/2015)

Ceramics and Composites

Optimizing the Performance of Ion-Transfer and Energy Store via Hexagonally Ordered Alumina Nanopore (5/1/2015)

Interactions Between Wear Mechanisms in a WC-Co-Ti-6Al-4V Machining Tribosystem (5/27/2015)

Commercial Marketing Forum

The Use of Estolides to Produce High Performance Lubricants (5/28/2015)

New Base Stock for Differentiated High-Performance Synthetic Lubricants (6/1/2015)

Novitas Chemical Solutions, LLC (5/28/2015)

Advantages of Synfluid mPAOs in Lubricant Applications (5/12/2015)

Innovative Synthetic Base Oil Solutions Meeting Today's Synthetic Lubricant Needs (5/28/2015)

Enabling the Success of Lubricant Marketers and Formulators (5/15/2015)

Condition Monitoring

Root Cause Failure Analysis - Industrial Food Processing Spiral Oven Conveyor Chain System (5/4/2015)

Accurate Total Water Measurement for On-Site Analysis of Turbine Oils by Infrared Spectroscopy (5/28/2015)

Best Practices for Condition Based Lubrication Using Ultrasound (4/27/2015)

A State-of-the-Art Colorimetric Patch Analyzer (5/6/2015)

Best Practices for Water Removal in Hydraulic Systems (5/1/2015)

Linking Ferrous Measurement to Particle Counting for Machine Condition Monitoring (6/29/2015)

An Integrated Lubricant Oil Conditioning Sensor Using Signal Multiplexing (5/11/2015)

Driving Compliance in an Oil Analysis Program (5/13/2015)

Engine and Drivetrain

A Study on the Effect of Ring Pack Structure on Blowby (5/6/2015)

Improving Fuel Economy with MoDTC without Increasing TEOST33C Deposit (5/1/2015)

Dispersant and Non-Disperant Comb Polymers - Building Blocks in Your Portfolio for Driveline Fuel (5/27/2015)

North American Gasoline Engine Oil Specifications - Past, Current, Future (5/29/2015)

The Role of VI Improvers in the Formulation of Fuel Efficient Engine Oils (5/29/2015)

Blackening of Copper Alloy Bearing Caused by Lubricating Oil for Automobile Engine (5/10/2015)

Pour Point Depressant Selection for Todays Engine Oil Aged in the Presence of Biodiesel by CEC L-105 (5/29/2015)

Experimental Research of Torsional Vibration of the Reciprocating Engine Considering Piston Ring (4/27/2015)

The Drag Torque Behavior of Manual Transmission Synchronizers (5/12/2015)

Environmentally Friendly Fluids

Tribological Profile of Environmentally Acceptable Lubricants for Passenger Car Shock Absorbers (5/1/2015)

Non-Edible Balanites Roxburghii Plant Oil for Environmentally Friendly Fluid Application (5/1/2015)

Ester Base Stocks for Marine Lubricants (5/4/2015)

Modified Natural Oils with New Fatty Acid Traits for Industrial Lubricant Applications (6/26/2015)

Fluid Film Bearings

Thermo Elastic Distortion and its Control in Thin Film Hydrodynamic Lubrication Thrust Bearings (4/27/2015)

Response of an Open Ends Squeeze Film Damper to Large Amplitude Impact Loads (4/27/2015)

A Comparative Study Between a Reynolds Equation (With Discrete Mass Injection) and 3D Navier-Stokes (5/7/2015)

Performance Characteristics of Gas-Expanded Lubricants in Hybrid Bearings (5/1/2015)

Measurements of Leakage and Force Coefficients in a Short Length Annular Seal Operating with a Gas (4/27/2015)

Transient Pressure and Temperature Field Measurements in a Lightly Loaded Circumferential GJB (4/27/2015)

Transient Thermohydrodynamic Behavior of a Turbocharger Thrust Bearing (4/27/2015)

Influence of Tilt on the Performance of Circular Thrust Pad Bearing of Various Recess Shapes (4/27/2015)

Performance of Full Textured Hybrid Thrust Bearing by Considering the Temperature Variation (4/27/2015)

Performance of Symmetric Slot-Entry Hybrid Journal Bearing in Turbulent Regime (5/1/2015)

About the Stiffness of Bumps in Aerodynamic Foil Bearings (5/28/2015)

Experimental Assessment of Drag and Rotordynamic Response for a Porous Type Air Bearing (6/29/2015)

A Transient Modified Reynolds-Elrod Equation (MREE) with Discrete Injection (5/28/2015)

A General Finite Volume Method Solution for the Reynolds Lubrication Equation (4/27/2015)

A Volume of Fluid Method for Air Ingestion in Squeeze Film Dampers (5/28/2015)

Comparison of Performance Analysis of Non-Recess Hydrostatic-Hybrid Conical Journal Bearing (5/5/2015)

Influence of Semi Cone Angle on the Performance of a Conical Hydrodynamic Journal Bearing (4/27/2015)

Gears

Film Thickness Investigation in Heavily Loaded Hypoid Gear Pair Elastohydrodynamic Conjunctions (4/27/2015)

Grease

Calcium Sulfonate Complex Grease in Electric Motor Bearings (6/29/2015)

A Superior PTFE Powder for Grease (5/28/2015)

In Situ Tribology

A Tensioner Friction and Wear Simulation Testing Tribometer for Seabed Pipeline Construction (5/4/2015)

Surface Damage of Magnetic Recording Media Under Dynamic Sliding Contact (5/19/2015)

Lubrication Fundamentals

Simulation of Plasto-Elastohydrodynamic Lubrication (PEHL) with Rolling Behaviors (5/28/2015)

Simulation of Plasto-Elastohydrodynamic Lubrication (PEHL) in Finite Line Contacts (5/28/2015)

Two-Way Coupled Reynolds and Rayleigh-Plesset Equations for a Multiphysics Fully Transient (5/6/2015)

Lubrication with Liquid Crystal - Minimization of Friction at Various Speeds (4/27/2015)

An Investigation on Tribological Properties of Graphene and MoS2 Nanoparticles as Additives (5/10/2015)

Simulation of Temperature-Elastohydrodynamic Lubrication for Point Contact Analysis (5/1/2015)

The First Normal Stress Difference in a Shear-Thinning Motor Oil at Elevated Pressure (4/27/2015)

Studies of Variation in the Oxidation Inhibition of Base Oils (5/5/2015)

Pressure-Temperature Viscosity Measurements and Simulations of Lubricants with Viscosity Modifiers (5/27/2015)

A New Approach to Measure Low Temperature Viscosity of Drive line Fluids (5/1/2015)

Newly-Synthesized Thermally-Stable Ionic Liquids as Friction Modifiers for Carbon-Coated Media (5/1/2015)

Comparison of Thermoelectric Measurements with Models of Sliding Asperity Contact Flash Temperatures (6/30/2015)

Experimental and Theoretical Study of SAE 10 Hydraulic Oil Lubricated EN-31 Steel-Steel Tribo-Pairs (5/1/2015)

EHL Contact Temperature – Comparison of Theoretical and Experimental Determination (5/14/2015)

Study on the Lubricated Point-Contact with Oil Droplet (5/5/2015)

Lubrication of Engineered Surfaces

Measurement of Lubricant Viscosity and Detection of Boundary Slip at High Shear Rates (6/1/2015)

Materials Tribology

Existing Challenges in Investigating the Wear Behavior of Nanostructured Intermetallic Coatings (5/5/2015)

Tribological Property of a New Wear-Resistant Belt Material Under the Extended Reach Well Condition (5/1/2015)

Metalworking

Influence of Inhibitor’s Chemistry and Structure on Aluminum Corrosion in MWF (4/27/2015)

Grinding of Mould Steel with Graphene Platelets Dispersed in a Vegetable-Based Cutting Fluid (5/14/2015)

Study of Emulsion Stability of Rolling Oils (4/27/2015)

N-Alkylalkanolamines and N-Alkylalkanolamine Derivatives for Metalworking (5/10/2015)

Metalworking Fluids Foam Control Based on Novel Surfactants Technology (5/15/2015)

Ultra-Stable Emulsifiers for Metalworking Fluids (4/27/2015)

Molecular Chemistry and Lubricant Rheology

Investigations of Polymer Molecular Design for High Performance Lubricant Additives (5/15/2015)

Ultra-Accelerated Quantum Chemical Molecular Dynamics for Tribological Applications (5/11/2015)

Multifunctional Surfaces for Tribology: An Emerging Technology Session

Experimental Research of Adhesive and Frictional Properties (4/27/2015)

Nanoscale Phenomena in Materials Tribology

Nanotribology

Change of Material Properties and Contact Performance of DLC Film Using Molecular Dynamics (6/2/2015)

Nanotribology Application in the Coining Industry II (5/11/2015)

Modeling of the Capillary-Driven Flow Between Rough Surfaces (5/1/2015)

Effect of Nanoparticles on the Running-In Behavior in Lubricated Point Contact (6/1/2015)

Control of Nanoscale Friction of Gold in Sodium Dodecyl Sulfate Aqueous Solution (4/27/2015)

Nanotribology Application in the Coining Industry I (5/11/2015)

Nanotribology Application in the Coining Industry III - Thermodynamic Model (5/11/2015)

Tribological Properties of Introducing Carbon Nanoparticles Produced by Arc Discharge (6/30/2015)

Nonferrous Metals

Soy-Based Lubricants - Taking the Soybean Route to More Effective Biobased Lubricants (5/10/2015)

Minimum Quality Lubrication (MQL) Present and Future Trends (4/27/2015)

Power Generation

Benefits of Using Colorimetric Patch Analyzers for Investigating Turbine Oil Contamination (5/6/2015)

Development of Depletion Diagnosis Method for the Antioxidants by the Colorimetric Analysis (5/1/2015)

A Complete Electrodynamic Model for Filter Induced Electrostatic Discharge (6/2/2015)

Field Investigation of Turbine Oil Oxidation Products (5/6/2015)

New Estimation Method for Oxidative Deterioration of Turbine Oils by the Color of Membrane Patch (5/1/2015)

Practical Lubrication Practices

Rolling Element Bearings

Stiffness and Damping of Rolling Element Bearings Under Turbine Engine Operating Conditions (6/3/2015)

Elastic Cage Instability in Rolling Bearings - Simulation and Test (4/27/2015)

Electric Discharges in Ball Bearings and Damages (5/5/2015)

ADORE Validation of Bearing Heat Generation for a 133-mm Angular Contact Ball Bearing (6/3/2015)

Numerical Investigation of the Cage and Rings Influence on the Ball Drag Coefficient (5/10/2015)

Seals

Reciprocating Seals Numerical Simulation Model and Software (5/13/2015)

Face Contact Analysis of Spiral Groove Gas Face Seals Using Fractal Model (5/1/2015)

Study of Topological Optimization in Dry Gas Seal for Improving Sealing Ability (5/1/2015)

Modeling the Impact of Lateral Pump Vibrations on the Dynamics of Mechanical Seals (4/27/2015)

The Development of a New High Pressure Oilseal (5/13/2015)

The Model Based on Accelerating Worn Surfaces in Mechanical Seal (5/11/2015)

Surface Engineering

Experimental and Theoretical Analysis of the Elasto-Plastic Oblique Impact of a Rod with a Flat (5/29/2015)

A 3D Model for Piston Ring Cylinder Liner Tribosystem Considering the Honing Groove Parameters (5/4/2015)

Tribo-Corrosion Protection of Valves and Rotors Using Cermet Layers Applied with HVOF (4/27/2015)

The Effectiveness of Surface Modification on the Tribological Properties of SiC and Si3N4 Ceramics (5/10/2015)

Influence of Microstructure Shape, Non-Newtonian Lubricant and Thermal Effects (5/13/2015)

Synthetic and Hydraulic Lubricants

Low Temperature Properties of Hydraulic Fluids - Design Tools Available for the Lubricant Formulator (5/1/2015)

Shortcut to Improved Efficiency - Research Points to Hydraulic Fluid (5/29/2015)

Analysis of Diester Lubricated Starved EHL Line Contacts (5/1/2015)

Varnish - Old Aging Products in Mineral Oils (5/1/2015)

Hydraulic Fluids in Servo-Valves on Harsh Environment (5/10/2015)

A New Insight into the Benefits of Synthetic Esters in Lubrication (5/15/2015)

PFPE Base Oils for Special Applications in Automotive Industry (5/10/2015)

Tribotesting

The Sliding Hertzian Point Contact in Tribotesting - Understanding its Limitations (5/1/2015)

Wear

Thin Layer Activation Technology as On-Line Wear Measurement in the Tribology Lab (5/5/2015)

Experimental Research of Cylinder Liner Wear Based on Reciprocating Friction Machine (5/7/2015)

Evaluation of Wear Resistant Refrigerant Compressor Lubricants (5/4/2015)

Tribological Behavior of Polyurethane Under Drilling Fluid and Brine (4/27/2015)

Wind Turbine Tribology

A Hypothesis on the Electromagnetic Cause of White Etching Cracks in Bearing Steel (4/27/2015)

The Effects of Alloy Elements and Heat Treatments on White Structure Flaking in Rolling Bearings (5/1/2015)

Investigation of the Role of Hydrogen in White Structure Flaking of Wind Turbine Gearbox Bearings (5/1/2015)