AM2013 Extended Abstracts

Biotribology

Effect of kinematic conditions and materials of contact surfaces

Wear Behavior of Highly Entangled Ultra-High Molecular Weight Polyethylene

Development of a Multidirectional Rolling-Sliding Tribo-system for UHMWPE

Ceramics and Composits

Micro-Abrasive Wear of Two Dental Restorative Materials

Engine and Drivetrain

Friction Coefficients of a Wet Clutch Using Blends of Automatic Transmission Fluid and Bio-Lubricant

Friction reduction on powertrains by polyglycols, alternative steels and or thin films

Frictional Moment Analysis of Ball Screws Considering Load Distribution

Frictional Heat Analysis of the Planetary Roller Screw Considering Load Distribution

Fluid Film Bearings

The Research of Non-Newtonian Properties and Rheology of Thin Lubricant Layers in Hydrodynamic Journ

Application of parallel particle swarm optimization method to the air foil bearing design

Influence of Wear on the Performance of Four-Pocket Six-Pocket Conical Journal Bearing System compen

Mathematical Model for Variation of Viscosity with Temperature and Concentration of Nanoparticles in

Experimental Investigation of Hydrodynamic and Thermal Effects on a Flat-Land Thrust Bearing

View all

Gears

Grease Lubrication - Wear Behavior of Gears Lubricated With NLGI 00 Greases at Low Speeds

Transient Elastohydrodynamic Analysis of Helical Gear Tooth Contacts

Rolling Contact Fatigue- experimental study of the influence of sliding, load and material propertie

Grease

A Study of the Tribological Benefits Offered by Various Surface Features and Roughness Conditions wi

Lubrication Fundamentals

Investigation of Negative Effects of Polymer Films on Cooling

Non-Newtonian Thermal Elastohydrodynamic Lubrication Analysis of Perfluoropolyether Fluids with High

Nanodiamond-based nanolubricants- investigation of friction surfaces

An Elastic Potential based Soft-EHL Model for Slurry Fluid Pressure Prediction during CMP

A Wafer-Scale Particle Augmented Mixed Lubrication Modeling Approach for Chemical Mechanical Polishi

View all

Materials Tribology

Fluorinated Carbon Blacks as New Nano-Additives for Lubricating Oils and Greases

The Application of Water Soluble Polymers in Rust Preventives

Nano-Mechanical and Chemical Characterization of Tribofilms Formed under Conformal Contact Condition

Metalworking

Evaluation of ZnO Metalworking Nanofluids

Amine/Biocide Impact on MWF Performance Longevity- An Accelerated Laboratory Evaluation

Tribological profile of binderless niobium carbide

Long Life Emulsion Metalworking Fluids formulated with an "HLB" Optimized N-alkylalkanolamine

Nanotribology

Studies on two dimensional nanoscale reciprocating sliding contacts of textured surfaces

Experimental Characterization of Friction and Wear Graphene Monolayers

Nano tribological properties of tribofilms obtained from microparticles of graphite

Ionic liquid-mediated dispersions of nanomaterials for high performance lubricants

Achieving ultra-low friction in commercial oils by serpentine modification of sliding surfaces

View all

Nonferrous

Electric Charge and Evaporation Control in Ester Oils

Lubrication Properties of New Crop Oils

Non-Ferrous Hot Rolling Lubrication- The Next Generation

Tribological Properties of Polymer Brushes from Bio-based Monomers

Power Generation

In Situ Monitoring of Wear Particles and Water in Power Generation Lubricants

Evaluations of Non-Aqueous Fire Resistant Hydraulic fluids Using the Hot Manifold Ignition Test

Practical Lubrication Practices

Rolling Element Bearings

Investigations on Power Losses and Thermal Behaviour of Rolling Element Bearings- Transient Aspects

Accuracy in Tapered Roller Bearing Equilibrium

Influence of rolling elements distance on starvation

Numerical Investigations on Drag Coefficient of Balls in Rolling Element bearings

Comparison of Models for Rolling Bearing Dynamic Capacity and Life

View all

Seals

Tribological behavior of silica or/and alumina coatings on stainless steel

Prediction of Radial and Axial Acting Seals Followability Under Extreme Operating Conditions

The Problem is Solved - Bidirectional PTFE Lip Seals

Effect of Air Plasma Spraying Distance on WC-12%Co Cermet Coating Using SS-321 Substrate

Test Apparatus to Identify Rotordynamic Coefficients and Leakage Flow of a Flexible Floating Ring Se

View all

Surface Engineering

Synthetic and Hydraulic Lubricants

Extended Pump Shearing of Hydraulic Fluids

Comparing Field Testing Shear to Laboratory Shear Testing for Hydraulic Fluids

Testimg

Solid Particle Erosion Testing With a Gas–Jet Apparatus

Tribotesting

Rheology for Tribology- Additional Informations and Synergies

Stick-Slip Leads to Considerable Error in Measuring Friction Coefficient

Fast Lead Analysis Method for Shaft Counter Surfaces of Radial Lip Seals

The Traction Behavior Of Desert Gold Grease Under Heavy Loads, Low Speeds And Various Temperatures

Wear

New Adhesive Wear Law of Micromechanical Surface Contact

"Kicking up some dust" - An Experimental Investigation Relating Lunar Dust Erosive Wear to Solar Pow

Journal Bearings Wear Correction using Magnetorheological Fluids

Experimental Analysis and Wear Modeling for Mechanical Components of a Typical Rail Launcher

Modelling the Variation of Friction in a Self-Lubricating Composite Bearing Due to Wear

View all

Wind Turbine Tribology

Serial Sectioning, FIB and TEM Investigations of Butterfly and White Etching Crack (WEC) Formation

Investigation and Characterization of Micropitting Damage in Bearing Steels

Sensor Integration for the Condition Monitoring of Wind Turbines

Investigations of Bearing Failures Associated with White Etching Areas (WEAs) in Wind Turbine Gearbo

Presented at the
STLE Annual Meeting
May 2013
Detroit Michigan