Grease Selection for Rolling Element Bearings
Instructor: Dr. Paul Shiller, University of Akron
Where: STLE University, live webinar event broadcast to your computer
When: Thursday, November 7, 2013 at 12-1:00 p.m., with optional Q&A from 1-1:30 p.m. Central Time
Cost: $39 for members, $59 for non-members
Due to their availability and ease of installation and maintenance, ball or roller bearings are widely used in a broad variety of machines and equipment. Consequently, design and maintenance personnel, as well as lubricant suppliers, are often confronted with need for some knowledge of their theory and application. Accordingly, this webinar will review the basics of grease selection from a basic evaluation to determine the best choice in viscosity and thickener to other application considerations that need to be addressed. The webinar will then discuss some ideas of selecting greases based on current marketing literature.
The webinar will cover:
• Why bearings fail
• Why oils?
• Oil or Grease?
• Choosing an oil viscosity
• Choosing a base oil
• Choosing a thickener
• Other application considerations
• Sifting through the marketing information
Paul Shiller received a Ph.D. degree in Physical Chemistry from Case Western Reserve University in Cleveland, OH studying the surface reactions at fuel cell electrodes using molecular orbital methods. He holds an M.S degree in Chemical Engineering also from Case Western Reserve University where he studied the characteristics of “Diamond-like films”. He received a BE degree in Chemical Engineering from Youngstown State University. He recently moved to the University of Akron as a Research Scientist in an “Open Innovation” collaborative effort between The University of Akron and The Timken Co. At The University of Akron he will be working in the Timken Engineered Surfaces lab, which is part of the Center for Surface Engineering and Lubrication Research. In this position he will carry out fundamental studies of lubrication additives and lubrication mechanisms with an emphasis on modeling and high-pressure properties. Previously he worked at The Timken Company as a Product Development Specialist for lubricants and lubrication in starting in 2004. He then moved to a position as a Tribological Specialist within the Tribology and Next Generation Materials group at the Timken Technology Center in North Canton. At Timken he studies how the chemistry of lubricants affects bearings especially how additives can be used to extend bearing life. Before coming to Timken he managed a polymer analytical chemistry lab at the Packard Electric division of DELPHI. He started at Packard Electric as a quality control engineer in the ignition cable department when Packard Electric was a division of General Motors. He was a Process Engineer on the thin film deposition processes for liquid crystal display products at PanelVision in Pittsburgh. Paul worked as a Research Engineer at The General Tire Company in Akron studying polymer extrusion and molding and the performance of tennis balls. He started his lubrication career as a Summer Intern at The Penn State University.
Paul has received a Professional Promise Award from AIChE and the Shell Lubricants award for Instructor Excellence from NLGI. He is also currently an Adjunct Professor of Chemistry at Kent State University. Paul is a member of STLE, ACS, and SOR.
Phone: (847) 825-5536
Email: Kara Sniegowski at firstname.lastname@example.org
Reminder: Computer speakers or headphones are needed to hear the audio.
Registration is now open. Please ensure you're logged in at www.stle.org first, then click on the link below. Once you arrive at the event listing, click "add to your products" to start the purchase process.
Click Here to register for this event.