Lubrication Selection for Rolling Element Bearings
Instructor: Jim Oliver, Director Application Engineering, SKF Bearings
Where: STLE University, live webinar event broadcast to your computer
When: Tuesday, September 23, 2014 at 12-1:00 p.m., with optional Q&A from 1-1:30 p.m. Central Time
Cost: $39 for members, $59 for non-members
This webinar will cover how application engineers determine whether to lubricate a bearing with oil or grease, and the selection process used to determine the required lubricant properties such as thickener type, base oil viscosity and additives to adequately lubricate a rolling element bearing based on its operating conditions, size and bearing type.
Jim Oliver obtained his BSME from Lafayette College in May 1985 and began his career with SKF immediately afterwards. He spent 4 years in Application Engineering, 4 years as a Metals Industry Specialist and 2 years as Service Manger in the Southeast U.S. In 2001, Jim relocated to the USA corporate office in Kulpsville, PA as Engineering Manager of Application Engineering for the Industrial Division of SKF USA. He spent 12 years as an engineering manager working with major OEMS producing pumps, fans, compressors, electric motors, medical procedure chairs and tables, X-ray tubes, and postal sorting machines. Most recently, Jim accepted the position as Director of Application Engineering and Industry Specialists in February 2012 and continues in this role today. Part of this role is the SKF USA representative to ABMA, and support of STLE, AIST, SME, and other technical societies.
Phone: (847) 825-5536
Email: Kara Sniegowski at firstname.lastname@example.org
Reminder: Computer speakers or headphones are needed to hear the audio.
Registration will open soon. Please ensure you're logged in at www.stle.org first, then click on the link below. Once you arrive at the event listing, click "add to your products" to start the purchase process.