• Comparison of Unconfined and Confined Loading of Biomimetic Materials 

• Real-World Approach to Contamination Control of Hydraulic Fluids 

• Bottle Sampling versus Online Monitoring 

• Roll-Off Cleanliness as an Important Factor to Cost Control 

• Rotor-Stator Rubbing Contact in an Overhung Rotordynamic System 

• Automated Wear Debris Identification - A Case Study 

• Effective Oil Aeration Measurement With an Online Imaging Method 

• Time-Temperature-Pressure Superposition in Polymer Thickened Liquid Lubricants 

• Research on Heat Generation of Ball Screw Considering Load Distribution and Geometry Error 

• Research on Frictional Moments and Transmission Efficiency of Planetary Roller Screw 

• Effect of Lubricant Rheology and Operating Conditions on the Rotating Speed 

• 2D Mapping of Piston Skirt Lubricant Film Thickness Using Ultrasound 

• Friction Screening Test for Wet Multiple Disc Clutches with Paper Type Friction Material 

• Optimizing Oil Consumption in Combustion Engines 

• Friction Characteristics of Polyalkylene Glycol Based Engine Oil Formulations 

• Influence of Calcium Sulfonate on Wet Clutch Durability 

• A Prototype Low-Viscosity Engine Oil Using an Ionic Liquid as Anti-Wear Additive 

• Determination of Temperatures Field for Multi-Disc Clutches 

• The Development of Eco-Friendly Nanoscale Water-Soluble Lubricants 

• The Effect of Phosphonium- and Imidazolium-Based Ionic Liquids as Additives in Natural Oil 

• Test Methods for Testing Biodegradability of Lubricants 

• Contact Degradation in Tilting of Pivoted Journal and Thrust Pads 

• Experimental Analysis of the Transient Performance of Thrust Bearings 

• An Experimental Comparison of the Steady-State Performance 

• Numerical Investigation of the Cavitation Damage in a High Performance Engine Conrod Big End Bearing 

• Numerical and Experimental Investigations of Tribosystems of Piston Engines 

• On the Stribeck Curve Type of Behavior for Polycrystalline Diamond Thrust Bearings 

• Influence of Surface Texturing in Steady-State and Transient Lubrication Regime 

• Mixed Elastohydrodynamic Lubrication with 3D Machined Roughness in Spiral Bevel Gears 

• Influence of Gas Nitriding on Rolling Contact Fatigue - Application on Alloyed Steels for Gears 

• Investigations on CFD Simulation for Predicting Windage Power Losses Generated by Helical Gears 

• A Boundary Lubrication Model Including Surface-Film Failure for Gear Contact Analysis 

• Varnish Elimination for Gear and Re-Circulating Bearing Oils 

• New Organic Friction Modifiers for Industrial Gear Oils 

• Grease Flow in Elbow Channel 

• The Effect of Thickener on EP Additive Response 

• New Class of Overbased Sulfonate Grease Fortified with Alkylated Naphthalene Base Oil 

• PTFE for Lubricating Greases 

• In Situ Raman Micro-Spectrometry Investigation of a Dynamic Contact Lubricated 

• In Situ Fluorescence Microscopy Applied to Dynamic Lubricated Contact Investigations 

• Detecting Galling and Other Forms Of Catastrophic Adhesion in Tribotests in Real-Time 

• Development of New Ultrasonic Instrumentation to Measure Lubricant Properties in Auto Engines 

• In Situ Nano-Tribology Experiments in TEM - Investigations of the Behavior of Single Nanoparticles 

• Initial Process of Boundary Film Formation Observed by Ultrathin Film Interferometry 

• Deposit Formation from Lubricant Degradation - A Deposition Model - Part 1 

• Inlet Lubricant Distribution of EHL Under Different Speeds 

• Deposit Formation from Lubricant Degradation - A Deposition Model - Part 2 

• Laboratory Formulation Software Meets GHS SDS Requirements 

• PCMO Lubricant Friction Modifier Performance Durability - Extended Tribology Studies 

• Ionic Liquids and Ionic Liquid-Mediated Dispersions of Nanomaterials as High Performance Additives 

• Development of a Novel High-Throughput Laboratory Instrument to Simulate High Temperature Lubricant 

• h-p- Non-Conforming Least Square Spectral Element Method for Solving EHL Line Contact Problem 

• Experimental Investigation of Lubrication Film Starvation of Polyalphaolefin Oil at High Speeds 

• A Theoretical Analysis of the Mixed Elastohydrodynamic Lubrication in Elliptical Contacts 

• Lubricant Film Thickness Behavior in Point Contacts Considering the Effect of Plastic Deformation 

• Rheological and Tribological Properties of Viscosity Index Improver Polymers in Base Oils 

• Applications of Ultra-Shear Viscometry to Fuel Economy Optimization 

• Boundary Regime Friction of Commercial and Experimental Oils 

• Ultra-Accelerated Quantum Chemical Molecular Dynamics Simulation of Overbased Detergent Interaction 

• Experiment-Integrated Multi-Scale Multi-Physics Computational Chemistry Modeling 

• Experimental Coefficient of Friction for the Impact of a Tennis Ball 

• Permanent Viscosity Loss of Viscosity Modifiers in Laboratory Bench Shear Tests 

• Planar Mechanisms with Friction 

• A 3D Thermal EHL Model For Point Contact Analysis 

• The Expected Laws on the Change of Colors of Contaminants of Used Lubricating Oils 

• Cost-Effective Formulating with Sulfurized Additives 

• Influence of Microstructural Evolution of Al-Si Coated Ultra-High Strength Steel 

• Rolling Friction Behavior of Magneto-Rheological Elastomer under a Magnetic Field 

• The Effect of Particulate Additives on the Tribological Performance 

• Driving Influence of Contamination on the Rheological Properties of Solid 3rd Bodies 

• Tribo-Oxidative Wear with Self-Lubricating Bearings in High Frequency, Low Amplitude Oscillation 

• Reactive Boundary Layers in Metallic Rolling Contacts 

• New Ways to Develop Lubricating Composite Coatings on Stainless Steel 

• The Case for Product Testing 

• Defoamer Theory and Selection for Aqueous Metalworking Fluids 

• Non-Formaldehyde Releasing Biofilm Control Options 

• Fatty Alkanolamines, Fatty Alkanolamides and Mixed Amino-Amide Molecules 

• The Tribological Effects of Metal Removal Fluids Diluted with Purified Water 

• New Tool Box for Superior Foam Control in Metalworking Fluids 

• Study Amines as an Additive for Metalworking Fluids 

• Microbiology in Bio-Concept Metalworking Fluids 

• A Novel Multiple Cutting Fluid Dispensing System for Sustainable Manufacturing 

• Tribological Analysis of Influence of Coolant Concentration During Grinding A Mould Steel Grade 

• A New Look at a Traditional Preservative System in Metalworking Fluids 

• The Formation of Colored Compounds from Various Metalworking Additives 

• Shear‐Thinning at Pressures Above Ambient 

• AFM Characterization of Effects of Electrical Potential on Self-Organized 

• Nanotribologic Friction Study of a Single Fluorinated Graphitized Carbon Nanofiber 

• A Local Region Molecular Dynamics Simulation Method for Nanoscale Sliding Contacts 

• A Model for Capillary Flow Between Rough Surfaces 

• Tribological Effects of Nanofluids on Aluminum and Copper 

• Synthesis of Efficient Nanoparticles for Boundary Lubrication 

• Novel Fullerene-Like inorganic Nanoparticles of Tungsten Disulfide (IF WS2) as a Superior Lubricant 

• Bio Basestocks for Lubricants in North America 

• Aluminum Cold Mill Rolling Oil Distillation 

• Synthesis of Formyl Esters of Vegetable Oils 

• Effect of Surface Hardening Technique and Case Depth on Rolling Contact Fatigue Behavior 

• Understanding the Generation of Grease Noise in Ball Bearings Helps to Develop Low Noise Greases 

• Tribological Properties of Fuel Economy Gearbox Oils 

• Modeling the Rolling Bearing with Consideration of the Inclusions 

• Friction Moment of Instrument Bearing Undergoing Oscillatory Motion 

• Electromagnetic Impact on Early White Itching Cracks in Inhomgeneous Structure of Bearing Steel 

• Rolling-Bearing Service Life Based on Probable Cause for Removal – A Tutorial 

• Thermal Modeling of a Grease Lubricated Thrust Ball Bearing 

• Influence of Elastic Modulus Variation on L10 Bearing Life Prediction of Case Hardened Steels 

• Development of a Granular Cohesive Model for Rolling Contact Fatigue Analysis 

• Rotation Measurement of an Impacting Sphere Using Digital Image Correlation Methods 

• Modeling of Cage Guidance in a Rolling Bearing Multi-Body Dynamic Simulation Program 

• Residual Stress Evolution and Acoustic Emission During Lubrication-Assisted White Etching Crack 

• Investigation of Residual Compressive Stresses In Rolling Bearing Components 

• Residual Stress Evolution and Acoustic Emission During Lubrication-Assisted White Etching Crack 

• Confirming Subsurface Initiation at Inclusions as One Mechanism for White Etching Crack Formation 

• Understanding White Etching Cracks in Rolling Element Bearings 

• Premature White Etching Crack Bearing Failures in Wind Gearboxes 

• Experimental Validation of Fluid Film Simulation of a Hydraulic U-cup Seal 

• An Experimental Investigation on Brush Seal Hysteresis 

• Influence of Grease Properties on the Tribological Behavior of Radial Lip Seals 

• The Mechanism of a Wavy-Tilt-Dam Mechanical Seal in Reactor Coolant Pump 

• Experimental Study of the Thermal Behavior of Mechanical Face Seals 

• The Effect of Aging on the Performance of a Radial Lip Seal 

• Improving the Performance of a Mechanical Seal by Surface Texturing 

• Preventing Ingress Contamination by Providing Bearing Cavity Pressurization 

• The Lubricants Work of Adhesion - A Key to Sealing Performance 

• Description of the Functional Behavior of Radial Lip Seals using the 3D Parameters of ISO 25178 

• A Method of Evaluating Misalignments in Rotary Seals Using Ultrasonic Rayleigh Waves 

• Fluid Flow and Heat Transfer Simulation for Temperature Prediction in Radial Lip Seal Systems 

• Two Phase Flow in a Mechanical Seal 

• Semi-Analytical Model for the Contact Temperature Calculation in Radial Shaft Seals 

• The Effect of Coating Properties on Various Parameters in a Loaded Coated Spherical Elastic Contact 

• Surface Texturing by Vibration Assisted Machining with Piezoelectric Actuator 

• Microstructured Surfaces in Highly Loaded Contacts - Differences Due to Sliding Effects 

• An Investigation of Viscosity Effects on Axial Piston Motor Efficiency 

• Novel High Performance Synthetic Base Stocks 

• Field Performance Evaluation of High Performance Oil in Hydrocarbon Gas Compressor 

• Wear Effects of Mineral‐Oil Lubricant Dilution with Biofuels 

• Elastic Properties of the Fabric Liner and Their Influence on the Wear Depth 

• Difference in Preventive Mechanism for Fretting Wear Between Oil and Grease Lubrication 

• Running-In Effects on the Performance of Polycrystalline Diamond Thrust Bearings 

• Detailed Observation Just Under the Sliding Surface of a Gear Satisfactorily Used for a Long Period 

• Cavitation Erosion-Corrosion Of Ship Propeller Materials 

• The Use and Misuse of the Pin-on-Disk Wear Test